# Giro helmet strap creep

**URL:** <https://community.escapecollective.com/t/giro-helmet-strap-creep/5804>\
**Category:** Tech Help\
**Created:** [August 15, 2026, 11:57am UTC](https://community.escapecollective.com/t/giro-helmet-strap-creep/5804 "2026-08-15T11:57:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Neil\_Bell](https://community.escapecollective.com/user_avatar/community.escapecollective.com/neil_bell/32/7755_2.png) [@Neil\_Bell](https://community.escapecollective.com/u/Neil_Bell)\
**Post date:** [August 15, 2026, 11:57am UTC](https://community.escapecollective.com/t/giro-helmet-strap-creep/5804/1 "2026-08-15T11:57:36Z")

</div>

My Giro Eclipse Pro chin strap seems to loosen very quickly, i.e. almost after every ride or every other ride. What I mean is that the straps that feed through the male part of the under-chin buckle gradually creep outwards, such that the strap becomes loose and needs to be tightened up again very regularly.

This problem seems to be much worse on my Giro helmets than on other brands I’ve used in the past.

Is there a way to prevent this? It’s a real hassle because tightening the strap is quite fiddly with the excess cut off and the little rubber keeper thing.

---

<div class="post-metadata">

**Author:** ![Lou\_Patterson](https://community.escapecollective.com/user_avatar/community.escapecollective.com/lou_patterson/32/4543_2.png) [@Lou\_Patterson](https://community.escapecollective.com/u/Lou_Patterson)\
**Post date:** [August 15, 2026, 12:49pm UTC](https://community.escapecollective.com/t/giro-helmet-strap-creep/5804/2 "2026-08-15T12:49:51Z")

</div>

I always get the helmet straps adjusted to my liking then use a needle and thread to stitch down the strap to itself at the buckle.

---

<div class="post-metadata">

**Author:** ![Matty](https://community.escapecollective.com/user_avatar/community.escapecollective.com/matty/32/2981_2.png) [@Matty](https://community.escapecollective.com/u/Matty)\
**Post date:** [August 15, 2026, 2:56pm UTC](https://community.escapecollective.com/t/giro-helmet-strap-creep/5804/3 "2026-08-15T14:56:44Z")

</div>

Exactly this, then cut off the excess with a hot knife.

---

<div class="post-metadata">

**Author:** ![Neil\_Bell](https://community.escapecollective.com/user_avatar/community.escapecollective.com/neil_bell/32/7755_2.png) [@Neil\_Bell](https://community.escapecollective.com/u/Neil_Bell)\
**Post date:** [August 15, 2026, 7:02pm UTC](https://community.escapecollective.com/t/giro-helmet-strap-creep/5804/4 "2026-08-15T19:02:18Z")

</div>

Thanks both! Yes, that’s a great idea. I’ve already cut the strap to length, but didn’t think about sewing it down.